zedstar dot org » Handhelds

SlowFi protocols on copyleft hardware

john — Wed, 18 Aug 2010 19:40:00 +0000

Recently I have been working on Packedobjects which included redesigning the API and replacing a lot of C code in Scheme. I will try and formalize the whole encoding process which I have called Integer Encoding Rules. I also began work on a manual which includes some examples. My aim is to support the tool on OpenWrt which also involves maintaining the GNU Guile build.

I built and tested the software on my Ben Nanonote. The ipk is available: http://zedstar.org/ipk/packedobjects_0.4_xburst.ipk

After improving the documentation I intend to use the tool in a networking course at work. I think it is important for students to gain some experience of designing and structuring binary network protocols. We will be getting a bunch of Nanonotes to compliment the Openmoko Freerunners we have. This will provide some nice hands on experience packing some data and communicating it across different kinds of hardware.

Long term, I am interested in designing some funky SlowFi protocols on copyleft hardware.

GNU Guile on a Ben NanoNote with command line history (readline support)

john — Sun, 02 May 2010 21:20:40 +0000

I have been hacking at the OpenWrt Makefile and now have command line history working within the REPL.
opkg install http://zedstar.org/guile/libgmp_4.3.1-2_xburst.ipk opkg install http://zedstar.org/guile/libltdl_1.5.26-1_xburst.ipk opkg install http://zedstar.org/guile/guile_1.8.7_xburst.ipk

Once installed setup a .guile file:
root@BenNanoNote:~# cat /root/.guile (use-modules (ice-9 readline)) (activate-readline)

When you run guile now you should be able to use the up and down cursor keys to go through your command history etc.

A minimal OpenWrt image for the Openmoko Freerunner containing GNU Guile

john — Sun, 02 May 2010 17:10:29 +0000

To experiment some more with OpenWrt I dusted out a Freerunner and built a minimal image containing GNU Guile. The image is built with glibc and an IP 192.168.254.101 to match my Nanonote settings.

** UPDATE: GNU Guile now has readline support and root image now contains GLib **

Flash the following:

http://zedstar.org/freerunner/openwrt-s3c24xx-2.6-uImage

http://zedstar.org/freerunner/openwrt-s3c24xx-root.jffs2-128k

Boot the device then:
john@thinkpad:~$ telnet 192.168.254.101
Trying 192.168.254.101…
Connected to 192.168.254.101.
Escape character is ‘^]’.

=== IMPORTANT ============================
Use ‘passwd’ to set your login password
this will disable telnet and enable SSH
——————————————

BusyBox v1.16.1 (2010-05-02 14:45:14 BST) built-in shell (ash)
Enter ‘help’ for a list of built-in commands.

_______ ________ __
| |.—–.—–.—–.| | | |.—-.| |_
| – || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
KAMIKAZE (bleeding edge, r21293) ——————
* 10 oz Vodka Shake well with ice and strain
* 10 oz Triple sec mixture into 10 shot glasses.
* 10 oz lime juice Salute!
—————————————————
root@OpenWrt:/# uname -a
Linux OpenWrt 2.6.30.10 #1 PREEMPT Sun May 2 14:59:31 BST 2010 armv4tl GNU/Linux
root@OpenWrt:/# guile
guile> (string-tokenize “hello world”)
(“hello” “world”)
guile>

Guile on a Ben NanoNote

john — Thu, 25 Feb 2010 22:58:36 +0000

Received a Ben NanoNote today. It is a really natty little device with a lot of potential.

My standard test on how hackable a device is involves getting Guile running. Anyway, it was pretty easy to accomplish this despite not using openWrt before.

root@BenNanoNote:~# root@BenNanoNote:~# guile guile> (map (lambda (x) (+ x 1)) '(1 2 3 4 5)) (2 3 4 5 6) guile>

To install get the 3 xburst packages from here.

Happy Scheming!

Scripting with Guile on Openmoko

john — Sat, 05 Dec 2009 12:56:41 +0000

Having Guile running on an embedded device is very powerful. You can add scripting capabilities to a C program and avoid some of the cross compilation -> deploy cycles by simply editing the script to change some functionality. As an example I have taken the code from the excellent introductory article Scripting with Guile. I packaged the code so that if you install the tarball or the ipk it will install both the binary and script to a suitable place.

Tarball: http://zedstar.org/tarballs/square-0.1.tar.gz

ipk: http://zedstar.org/ipk/square_0.1-r0_armv4t.ipk

After installing Guile do:

root@om-gta02 ~/ipks $ opkg install square_0.1-r0_armv4t.ipk Installing square (0.1-r0) to root... Configuring square root@om-gta02 ~/ipks $ square result of square is 49 result of square2 is 81

Guile on an Openmoko Freerunner

john — Fri, 04 Dec 2009 10:09:54 +0000

I recently got hold of a bunch of Openmoko Freerunners. I needed a distribution which installs to Flash (NAND) so I chose SHR.

I am very impressed how things have progressed especially in terms of being a phone!

Anyway, this gave me a chance to try out some Guile packages I built. If you have a recent version of SHR unstable the following should work:

http://zedstar.org/guile/

Happy Scheming!

Simple example of accessing gpsd from C code

john — Tue, 24 Nov 2009 18:17:40 +0000

Code:

http://zedstar.org/tarballs/gpstest-0.1.tar.gz

From the README:

A simple GLib based program which periodically reads coordinates from gpsd.

The logs directory contains a sample gps log which can be fed to gpsfake:

gpsfake 1334-N-20071129-GTA01-A3.log

Make sure gpsd is not running before attempting to run gpsfake.

The data was taken from a Neo 1973 in central London. It will take a moment
to start showing coordinates.

** edit ** This example needs updating to work on newer GPSD versions

iPhone local search video

john — Wed, 25 Jun 2008 17:31:20 +0000

I made a video of searching my iPhone loaded with over 2000 PDFs from MIT’s OpenCourseWare. The search engine, Hyper Estraier, is the same one used on gnu.org but running locally on the iPhone together with a local lighttpd web server. It performs very well and provides a nice way of accessing or iPhone when on your daily commute!

http://www.youtube.com/watch?v=MKKlkcZ6vYo

Hyper Estraier + Xpdf tarball for the iPhone

john — Fri, 06 Jun 2008 11:04:22 +0000

I have not had time to look at packaging this but here is a tarball of the build which you can untar in the root directory. It will place everything in /opt/iphone

http://zedstar.org/tarballs/hyperestraier+xpdf.tgz

Hyper Estraier on the iPhone

john — Thu, 15 May 2008 21:51:10 +0000

I managed to get Hyper Estraier running with lighttpd on my iPhone. This provides a nice way to load the device with documents and have a simple search interface for accessing them. It is part of a larger project I am working on. I will try and package it soon or simply release a tarball of the build.